HIGH DEFINITION A/V SCALER FOR HDMI CONFIGURATION

Entering the Menu System

Pressing the Menu button on the included RMT-SR-IR remote control will display the GUI (graphical user interface) for adjustment options.

The GUI is overlaid onto the outgoing video to the display. Therefore, the selected source must be outputting a compatible resolution for viewing on the display. If video is not visible on the display, the GUI will also fail to be displayed. To correct this, please follow the steps below.

1.Verify that the source is on and outputting a video signal.

2.Verify that the RMT-SR-IR remote channel is in the default position (page 13).

3.Verify that the High Definition A/V Scaler for HDMI is selected to the chosen source.

4.Press the Output button on the RMT-SR-IR remote control to cycle through output resolutions until video is displayed. Please see page 8 for a listing of the available output resolutions and cycle order.

Navigation

Use the directional buttons to navigate the menu system. Press the OK button to enter a sub category and also to select a menu item for adjustment. Use the Left and Right buttons to adjust the selected menu item. Press the EXIT or OK button to return to the previous menu. Use the LEFT and RIGHT buttons to adjust selected options. Pressing the EXIT button while in the main menu will exit out of the menu system.

MAIN MENU

The following are the main menu options. Use the UP and DOWN buttons to choose your desired subcategory and press OK to enter it.

VIDEO

COLOR

OUTPUT

OSD

AUDIO

INFORMATION

VIDEO

Picture Mode

Preset and user configurable settings for different viewing scenarios. Preset settings will not allow user adjustment. Only the USER option will allow customized video settings. The USER settings are saved.

Options:

Standard - useful for general content

Movie - useful for dimly lit environments

Vivid - useful for accentuating colors for a more vibrant image

User - user configurable settings

NOTE: User settings are saved. However, user settings for the digital inputs (HDMI 1 and 2) are linked and user settings for the analog inputs (Composite, S-Video, and Component) are linked. i.e. adjustments to video user settings made on HDMI 1 will be reflected in HDMI 2.

6

Page 10
Image 10
Linear SCALER-2-1080P High Definition A/V Scaler for Hdmi Configuration, Entering the Menu System, Navigation, Main Menu