ADSL Modem

Chapter 2: Getting to Know the ADSL Modem

The Back Panel

The Modem’s ports, where cables are connected, are located on the back panel. The Modem’s reset button is also located on the back panel.

 

Figure 2-1: Back Panel

DSL

The DSL port connects to the DSL line.

Ethernet

The Ethernet port connects to your computer and other network devices.

Reset Button

There are two ways to reset the Modem's factory default settings. Either press the Reset

 

Button, for approximately ten seconds, or restore the defaults on the Factory Defaults screen

 

of the Administration tab in the Modem’s Web-Based Utility.

Power

The Power port is where you connect the power adapter.

With these, and many other, Linksys products, your networking options are limitless. Go to the Linksys international website at www.linksys.com/international for more information about products that work with the Modem.

Important: Resetting the Modem to factory defaults will erase all of your settings (WAN and LAN settings, etc.) and replace them with the factory defaults. Do not reset the Modem if you want to retain these settings.

Chapter 2: Getting to Know the ADSL Modem

3

The Back Panel

Page 8
Image 8
Linksys AM200 manual Getting to Know the Adsl Modem, Dsl