ADSL Modem

Firmware Upgrade

Firmware can be upgraded by clicking the Upgrade button after browsing for the firmware, which you can download from the Linksys website. Do not upgrade your firmware unless you are experiencing problems with the Modem. For more information about upgrading firmware, refer to “Appendix B: Upgrading Firmware”.

Factory Defaults

Restore Factory Defaults. If you wish to restore the Modem to its factory default settings and lose all your settings, click Yes.

To begin the restoration process, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes.

Reboot

This tab allows you reboot of your Modem. To reboot your Modem, click the Device Reboot button.

Click the Cancel Changes button if you want to undo your changes.

Chapter 4: Configuring the ADSL Modem

Figure 4-33: Firmware Upgrade

Figure 4-34: Factory Defaults

Figure 4-35: Reboot

23

The Administration Tab

Page 28
Image 28
Linksys AM200 manual Firmware Upgrade, Factory Defaults, Reboot