ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Ready
51
Instant Broadband™Series
50
With Dynamic Routing you can enable the Gateway to automatically adjust to
physical changes in the network’s layout. The Gateway, using the RIPprotocol,
determines the network packets’ route based on the fewest number of hops
between the source and the destination. The RIP protocol regularly broadcasts
routing information to other routers on the network. Select the RIPdirections
and versions for the LAN and WAN sides.
RIPDirection
Determines the direction that RIP routes will be updated.
• None RIP is disabled.
• Both The Gateway will incorporate received RIP information and send out
updated RIP information.
• In Only The Gateway will only incorporate received RIP information.
• Out Only The Gateway will only send out RIP information.
Dynamic Routing
Figure 6-21
Important:This is an Advanced Function. No changes should be made
to this tab without a thorough understanding of network concepts.
To add a server using Port Range Forwarding:
1. Enter the name of the application in the appropriate Customized
Applications field. This field is a description field only.
2. Next to the name of the application, enter the rangeof the external port(s)
used by the server or Internet application in the Ext. Port column. Check
with the Internet application software documentation for more information.
3. Enter the IP address of the server that you want the Internet users to be
able to access. To find the IPaddress, go to “Appendix D: Finding the
MACAddress and IP Address for Your Ethernet Adapter.”
4. Configure as many entries as needed—the Gateway supports up to 11
ranges of ports. Click the Applybutton and Continue button when you are
done.
To delete a server entry, enter 0in the Ext. Port and IP Address fields.
To clear any values you’ve entered on any page, click Canceland re-enter
information. To apply any settings you’ve altered on any page, click the Apply
button. Once all settings are correct, click Continue. For more information on
this tab, you can click the Help button.