Instant Broadband™ Series

The Crossover Switch

When “uplinking,” or connecting two pieces of network hardware together, such as a hub and a switch, a general rule of thumb is to plug one end of a network cable into a straight-through port, and the other end into a crossover port (uplink port). Standard ports are straight-through ports, and uplink ports are crossover ports.

T h e

1-

Port

Figure 3-2

Important: The chart in Figure 3-2 is for reference purposes only. Every network is different. If you do not make a connec- tion to a hub or switch by using the settings above, change the position of the Crossover Switch.

The 1-Port Router’s Front Panel LEDs

 

Figure 3-3

Power

Green. The Power LED lights up green when the Router is

 

powered on.

Link/Act

Green. The Link/Act LED serves two purposes. If the LED

 

is continuously lit, the Router is successfully connected to a

 

device through the LAN port. If the LED is flickering, the

 

Router is actively sending or receiving data through the LAN

 

port.

EtherFast® Cable/DSL Routers

Full/Col Green. The Full/Col LED also serves two purposes. If this LED remains lit, a LAN port connection is being successful- ly maintained. If the LED flickers, the connection is experi- encing collisions. Infrequent collisions are normal.

If this LED flickers too often, there may be a problem with your connection. See “Appendix A: Troubleshooting” if you encounter this problem.

10/100 Orange. The 10/100 LED lights up when a successful 100 Mbps connection is made through the corresponding port.

If a connection is running at 10 Mbps, the 10/100 LED will not light up.

The WAN Indicators

Link

Green. The Link LED lights up when a successful connec-

 

tion is made between the Router and your broadband device

 

or network.

Act

Green. The Act LED flickers when the Router is sending or

 

receiving data over the WAN port.

Diag

Red. The Diag LED lights up when the Router goes through

 

its self-diagnostic mode. It will turn off upon successful

 

completion of the diagnosis.

 

If this LED stays on for an abnormally long period of time,

 

see “Appendix A: Troubleshooting.”

 

Proceed to “Chapter 5: Connect the Router.”

12

13

Page 9 Page 11
Page 10
Image 10
Linksys BEPSR31, BEPSR41, BEPSR11 manual Crossover Switch, Port Router’s Front Panel LEDs, WAN Indicators
Page 9 Page 11

BEPSR31, BEPSR11, BEPSR41 specifications

The Linksys BEPSR series, which includes the BEPSR41, BEPSR11, and BEPSR31 models, is renowned for its commitment to providing robust, reliable networking solutions for both home and small office environments. Each model in this line features distinctive characteristics that suit different needs while maintaining the core performance that Linksys is known for.

The Linksys BEPSR41 is a four-port broadband router that stands out for its exceptional speed and stability. With support for ADSL and cable connections, this model is equipped with advanced features such as Network Address Translation (NAT) and a built-in firewall for enhanced security. The BEPSR41 utilizes wired Ethernet technology, providing reliable connections and lag-free access to the internet. Its four LAN ports enable connections to multiple devices, making it an ideal choice for households with numerous connected devices.

Moving on to the Linksys BEPSR11, this model is a more compact solution, designed for users with simpler networking needs. The BEPSR11 features a one-port configuration, making it perfect for individual users or small setups that require minimal device connectivity. Despite its smaller size, it offers solid performance with similar NAT and firewall capabilities as its larger counterpart. This model is an excellent choice for users who value simplicity and efficient internet connectivity without the complexities of advanced networking setups.

Lastly, the Linksys BEPSR31 combines features from both previous models, offering an ideal balance between performance and usability. It provides two LAN ports, making it suitable for small offices or homes where a couple of wired connections are needed. The setup process is straightforward, allowing users to get online quickly with minimal configuration. The BEPSR31 also supports basic QoS (Quality of Service) features, allowing users to prioritize traffic for smoother streaming and gaming experiences.

All three models emphasize ease of use, security, and dependable performance, catering to different user requirements. Their solid design, combined with Linksys’s reputation for quality and reliability in home networking, makes the BEPSR41, BEPSR11, and BEPSR31 excellent options for anyone looking to enhance their internet experience without extensive technical knowledge. Whether for gaming, streaming, or everyday browsing, these routers provide essential features that meet modern connectivity demands.
Top Page Image Contents