Manuals / Linksys / Computer Equipment / Network Router

Linksys Network Router specifications bit - a binary digit

Models: Network Router

1 42

Download 42 pages 745 b

Page 16

bit - a binary digit.

Wireless-G Range Expander

7.The Security Settings screen will appear next, if you have not entered this information already. From this screen, you can set the level of encryption on your network, along with entering the appropriate passphrases and/or encryption keys.

If your network’s WEP encryption uses a passphrase, enter it here. The passphrase can consist of no more than 16 alphanumeric characters.

When entering the WEP key directly, it should be no more than 10 hexadecimal characters in length for 64-bit encryption or 26 hexadecimal characters in length for 128-bit encryption. Hexadecimal characters are the letters "A" through "F" and the numbers "0" through "9". All points in your wireless network must use the same WEP key to utilize WEP encryption.

Click the Next button to continue or Exit to exit the Setup Wizard.

8.The Configure Network Address Settings screen will appear next. Enter an IP Address, Subnet Mask, the IP Address of your network Gateway, and an Expander Name. Then, click the Next button to continue or Back to return to the previous page.

•IP Address. This IP address must be unique to your network. (The default IP address is 192.168.1.240.)

•Subnet Mask. The Range Expander's Subnet Mask must be the same as your network.

•Gateway. This IP address should be the IP address of the gateway device that allows for contact between the Internet and the local network.

•Expander Name. You can assign the Range Expander any name up to 32 characters in length, such as its location (garage, downstairs, living room, etc.).

Figure 5-9: The Security Settings screen

bit - a binary digit.

Figure 5-10: The Configure Network Address

Settings screen

gateway - a device that interconnects networks with different, incompatible communications protocols.

Chapter 5: Setting Up the Wireless-G Range Expander

13

Image 16

Linksys Network Router specifications bit - a binary digit

Contents

Copyright and Trademarks How to Use this Guideword definition Table of Contents List of Figures Chapter 1 Introduction Welcomerouter - a networking device that connects multiple networks together adapter - a device that adds network functionality to your PCWhat’s in this Guide? Appendix F Warranty Information This appendix supplies the Range Expander’s warranty informationWireless-G Range Expander Appendix G Regulatory InformationChapter 2 Planning your Wireless Network SSID your wireless networks nameNetwork Topology RoamingNetwork Layout Chapter 3 Getting to Know the Wireless-G Range Expander Powerwhen there is network activity Wireless-G Range ExpanderThe Power Plate Figure 3-3 The Two Prong Power Plate Figure 3-2 The Power PlateWireless-G Range Expander with CordChapter 4 Connecting the Wireless-G Range Expander tcp/ip a set of instructions PCs use to communicate over a networkWall Mounting Chapter 5 Setting Up the Wireless-G Range Expander Figure 5-2 Connecting to an access point Click the Next button to continue or Exit to exit the Setup Wizard bit - a binary digit Figure 5-11 The Confirm New Settings screen Chapter 6 Configuring the Wireless-G Range Expander OverviewThe Setup Tab Basic Setupfirmware the programming code that runs a networking device subnet mask an address code that determines the size of the networkencryption encoding data transmitted in a network Figure 6-3 WEP Security screensoftware instructions for the computer Password download to receive a file transmitted over a networkupgrade to replace existing software or firmware with a newer version HelpAppendix A Troubleshooting Common Problems and SolutionsFrequently Asked Questions What IEEE 802.11b features are supported?What is Ad-hoc? What is Infrastructure?What is Roaming? What is ISM band?What is Spread Spectrum? What is DSSS? What is FHSS? And what are their differences?Can Linksys Wireless products support file and printer sharing? What is WEP?How do I resolve issues with signal loss? How do I reset the Range Expander?How do I avoid interference? Security Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks SSID. There are several things to keep in mind about the SSID WPA Pre-Shared Key. If you do not have a RADIUS server, select the type of algorithm, TKIP or AES, enter a password in the Pre-Shared key field of 8-64 characters, and enter a Group Key Renewal period time between 0 and 99,999 seconds, which instructs the Router or other device how often it should change the encryption keys Appendix C Upgrading Firmware Appendix D Windows Help TCP/IPShared Resources Network Neighborhood/My Network PlacesAppendix E Glossary Encryption - Encoding data transmitted in a network Router - A networking device that connects multiple networks together Appendix F Specifications Appendix G Warranty Information Appendix H Regulatory Information EN 609 50 Safety An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack, which is FCC Part 68 compliant. Connection to the telephone network should be made by using the standard modular telephone jack Wireless-G Range Expander Appendix H Regulatory InformationAppendix I Contact Information 2.4 802 GHz .11g Wireless- G WIRELESSUser Guide Range Expander