HOW TO START
Personal Injury and Product Damage Hazard
•DO NOT plug in if switch is in ON position, Personal injury or damage could result.
The cord moves rapidly when rewinding. Keep children away and provide a clear path when rewinding the cord to prevent personal injury.
DO NOT use outlets above counters. Damage from cord to items in surrounding area could occur,
Cord
Rewind
1. Pull cord out of canister to
desired length. The cord will
not rewind until the cord rewind button is pushed.
NOTE: To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, con- tact a qualified electrician to install the prop- er outlet, Do not change the plug in any way.
2.Plug the polarized power cord into a 120 Volt outlet located
nearthe floor.
To rewind: Unplug the cleaner. Hold
the plug while rewinding to prevent damage or injury from the moving cord. Push cord rewind button.
Indicator
Release
Pedal
Pile Height
Pedal
3.Lower wand from upright position by pressing on the handle release pedal.
CAUTION
4.Select a pile height setting by pressing
the small pedal on the rear of the Power- Mate '_.The pile height setting shows on the indicator. See SUGGESTED PILE HEIGHT SETTINGS.
Attention: Refer to your carpet manufac- turers cleaning recommendations. Some more delicate carpets may require that they be vacuumed with the
L/OFF
_p_r | 5, Select | a | switch |
| position | on | the |
| handle. |
|
|
©
OFF
FLOOR - turns on the canister motor only.
CARPET - tums on both the canister and the
NOTE - When this switch is in the FLOOR position, the headlight DOES NOT function
since no electricity flows to the Power- Mate *.
8
