POWER-MATE ® STORAGE
The | lower | wand |
|
has | a "U" | shaped | |
flange in the area | 'i" |
where the power cord attaches. The
base has a "U"
shaped slot near the front.
The flange allows
the wands and
with the canister to conserve storage space. The canister must be stored on end for this
feature to be used.
To attach the
The wand will slip out of the slot as it is lifted up for use and will slide into the slot as it is lowered for storage.
THERMAL PROTECTOR
This vacuum has a thermal protector which automatically trips to protect the vacuum from overheating. The thermal protector turns the motor off automatically to allow the motor to coot in order to prevent possible damage to the vacuum.
To reset: Tum off and unplug the vacuum from the outlet to allow the vacuum to cool.
Check for and remove any clogs. Also check and replace any clogged filters.
Wait approximately 50 minutes and plug the vacuum in and turn back on to see if
the thermal protector has reset. In some cases, the unit may suddenly restart. DO NOT leave unattended.
ELECTRONIC BAG/HOSE
CHECK INDICATOR
Electronic The light comes
Bag/Hoseon whenever
Check Indicator
the airflow becomes blocked, dust bag needs changing or canister safety filter needs cleaning.
NOTE: The light may come on when using certain attachments, due to reduced airflow through attachment.
Refer to TROUBLESHOOTING
STAIR GRIP
During normal operation while the vacuum is in the horizontal position, the caster wheel rotates freely 360 °.
The Stair Grip feature allows the caster wheel to lock in ff'_%" position when
the unit is rotated 25 ° from horizontal into a vertical position in order
for the vacuum to rest on stairs.
12