TO REMOVE BELT
TO CLEAN AGITATOR:
3.Turn Power- Mate ® right side up. Press handle release pedal and lower the swivel. Lift rear latches up.
5.Lift agitator assembly out and remove worn belt.
1.Turn Power- Mate ® upside down.
2.Unscrew the
two (2) Power- Mate ® cover
screws.
4.To remove cover, grasp the sides and pull out.
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacu- um, the aaitator must be cleaned every time
the belt is changed.
The agitator must also be cleaned accord- ing to the following schedule:
Vacuum | Use | Clean Aaitator | ||
HEAVY | - |
| every | week |
(used | daily) |
|
| |
MODERATE | - | every | month | |
(used | times/week) |
|
| |
LIGHT | - |
| every | 2 months |
(used | 1 time/week) |
|
| |
IMPORTANT
Disconnect cleaner from electrical outlet.
Check and remove hair, string and lint build- up frequently in the
and end cap areas.
Remove any dirt or debris in the belt path area or in the brush roller area.
Carefully remove any string or debris located on the agitator, or end caps.
Agitator Assembly
Brush Unit
End Cap
6.Check and clean end cap areas. See AGITATOR ASSEMBLY for picture of complete agitator assembly.
End
Cap
Belt Pulley
16
