!
2. Pull the exhaust
filter up and out
Fire and/or Electrical Shock Hazard
Do not operate with a clogged '.exhaust_ WARNINGfilter or without the exhaust I
filter or exhaust filter cover installed.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be replaced when dirty. Replace the filter when the entire surface area is covered
evenly. The filter CANNOT be washed as
it will lose its dust trapping ability,
NOTE: See PARTS AND FEATURES for exhaust filter number.
1.Pull out and
up on the exhaust filter
cover to remove from the vacu-
um and lay
aside.
JJ)l//l///l//l__,,,o, from the rear of
the vacuum.
3.Replace the exhaust filter
cartridge. Place the new filter into the vacuum with the grey edge
facingFilter 1 towards the
vacuum,
4. Replace the exhaust filter
cover by placing the two tabs on
the filter cover into the slots on the vacuum and rotate into place
until it snaps
Tabsclosed.
iiiii!iiiill | iiiiiii_iiTii!i_i_ii_ii | iiii!!iiiii!iii!iiiii!lliiilJiiiJilii!!!!iiiiiliiiiiiiiiiiiiiiiiii |
Always follow all safety precautions when cleaning and servicing the
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure to do so could result in elec-
trical shock or personal injury from cleaner suddenly starting.
15