Ethernet Connection AUX Connection Power Plug

Power on the cable/DSL modem.

E. Connect one end of an Ethernet network cable (included) to the ETHERNET port of the Gateway.. Connect the other end to your cable/DSL modem..

F. Connect one end of a different Ethernet network cable to the AUX port of the Gateway.. Connect the other end to the Ethernet port of your PC..

H. Connect the included power adapter to the Gateway’s power port, and then plug the power adapter into an electrical outlet..

Press the On switch to power on the Gateway.. The power LEDs on the front panel will light up as soon as the Gateway powers on..

I. Power on your PC..

Ethernet Connection

NOTE: Make sure your PC’s Ethernet adapter is set to obtain an IP address automatically.. For more information, refer to Windows Help..