7
Product Overview
WebView Switches
Chapter 2
POWER The Power port is where you will
connect the AC power.
CONSOLE The Switch is equipped with a
serial port labeled Console (located on the
back of the switch) that allows you to connect
to a computer’s serial port (for configuration
purposes) using the provided serial cable. You
can use HyperTerminal to manage the Switch
using the console port.
Refer to Chapter 4: Configuration Using the
Console Interface for more information.
NOTE: If you need to reset the Switch, unplug
the power cord from the back of the Switch.
Wait a few seconds and then reconnect it.