Wireless-N ADSL2+ Gateway

Bridge Mode Only

If you are using your Gateway as a bridge, which makes the Gateway act like a stand-alone modem, select Bridge Mode Only. All NAT and routing settings are disabled in this mode.

Optional Settings (required by some ISPs)

Host Name and Domain Name. These fields allow you to supply a host and domain name for the Gateway. Some ISPs require these names as identification. You may have to check with your ISP to see if your broadband Internet service has been configured with a host and domain name. In most cases, you can leave these fields blank.

MTU and Size. The MTU (Maximum Transmission Unit) setting specifies the largest packet size permitted for network transmission. Select Manual and enter the value desired in the Size field. It is recommended that you leave this value in the 1200 to 1500 range. By default, MTU is configured automatically.

Network Setup

Router IP. The values for the Gateway’s Local IP Address and Subnet Mask are shown here. In most cases, keeping the default values will work.

Local IP Address. The default value is 192.168.1.1.

Subnet Mask. The default value is 255.255.255.0.

Network Address Server Settings (DHCP). Configure the Gateway’s Dynamic Host Configuration Protocol (DHCP) settings in this section.

DHCP Server. A Dynamic Host Configuration Protocol (DHCP) server automatically assigns an IP address to each computer on your network for you. Unless you already have one, it is highly recommended that you leave the Gateway enabled as a DHCP server. You can also use the Gateway in DHCP Relay mode. (This setting is not available for all Encapsulation types.)

DHCP Server. If you enable the DHCP Relay mode for the DHCP Server setting, enter the IP address for the DHCP relay server in the fields provided. (This setting is not available for all Encapsulation types.)

Starting IP Address. Enter a value for the DHCP server to start with when issuing IP addresses. This value must be 192.168.1.2 or greater, because the default IP address for the Gateway is 192.168.1.1.

Maximum Number of DHCP Users. Enter the maximum number of users/clients that can obtain an IP address. The number will vary depending on the starting IP address entered.

Chapter 5: Configuring the Wireless-N ADSL2+ Gateway

Figure 5-7: Bridge Mode Only

Figure 5-8: Optional Settings

16

The Setup Tab

Page 22
Image 22
Linksys WAG300N manual Bridge Mode Only, Optional Settings required by some ISPs, Network Setup

WAG300N specifications

The Linksys WAG300N is a highly versatile wireless modem router, designed to meet the needs of both home and small office environments. This device combines multiple functionalities, featuring a Wireless-N access point, a 4-port Ethernet switch, and an integrated DSL modem. Its compatibility with ADSL2+ standards allows for seamless internet connectivity, ensuring that users can experience high-speed internet up to 24 Mbps, depending on their DSL connection.

One of the defining characteristics of the WAG300N is its support for the IEEE 802.11n wireless standard, which provides significantly improved data transfer rates over its predecessors. This technology allows for speeds of up to 300 Mbps, making it suitable for bandwidth-intensive applications such as streaming high-definition videos, online gaming, and large file downloads. The router's MIMO (Multiple Input Multiple Output) technology enhances wireless coverage, enabling connections at greater distances and through obstacles like walls.

Security is a key concern for Linksys, and the WAG300N addresses this with a variety of robust features. It supports WPA, WPA2, and WEP encryption for secure wireless connection and includes a built-in firewall to protect the network from unwanted intrusions. Parental controls are also available, allowing users to manage internet access, ensuring a safer online environment for children.

The Linksys WAG300N is easy to set up and manage thanks to its web-based interface. Users can quickly configure the device using the installation CD or through a straightforward online setup wizard. Furthermore, firmware updates can be performed easily, allowing users to keep their devices secure and up to date with the latest features.

In terms of design, the WAG300N boasts a sleek black casing with LED indicators for power, internet connectivity, and wireless activity, enabling users to monitor device status at a glance. Its compact size ensures it does not occupy excessive space, making it an attractive addition to any office or home environment.

Overall, the Linksys WAG300N is a powerful networking device that offers great performance, advanced security features, and ease of use, making it an excellent choice for users looking to enhance their internet connectivity experience. Whether for casual browsing or resource-intensive tasks, the WAG300N stands out with its blend of speed, reliability, and versatility.