Linksys WAG300N manual Factory Defaults Tab, Firmware Upgrade Tab

Wireless-N ADSL2+ Gateway

The Factory Defaults Tab

If you want to restore the Gateway’s factory default settings, then use this screen.

Factory Defaults

Restore Factory Defaults. If you wish to restore the Gateway to its factory default settings and lose all your settings, click Restore Factory Defaults. Then follow the on-screen instructions. Click Help for more information.

The Firmware Upgrade Tab

Use this screen to upgrade the Gateway’s firmware.

Firmware Upgrade

To upgrade the Gateway’s firmware:

1.Download the Gateway’s firmware upgrade file from www.linksys.com/international.

2.Extract the file on your computer.

3.On the Firmware Upgrade screen, click the Browse button to find the firmware upgrade file.

4.Double-click the firmware file that you have downloaded and extracted.

5.Click the Start to Upgrade button, and follow the on-screen instructions.

Click Help for more information.

Chapter 5: Configuring the Wireless-N ADSL2+ Gateway

Figure 5-46: Factory Defaults

Figure 5-47: Firmware Upgrade

45

The Administration Tab