Linksys WAP51AB manual Instant WirelessTM Series Dual-Band Wireless Access Point

Instant WirelessTM Series

Figure 5-1

Dual-Band Wireless Access Point

4.The next screen to appear, shown in Figure 5-3, will display a list of access points on your network along with the status information for each access point. If this is the only access point on your network, it will be the only one displayed. If there are more than one displayed, select the Access Point by clicking on it and click the Yes button to continue or No to exit the Setup Wizard.

3.The following screen, shown in Figure 5-2, displays how the Access Point is configured in this Setup Wizard. Optimally, you should perform this setup through a PC on your wired network. Click the Next button to con- tinue or Exit to exit the Setup Wizard.

5.You will be asked to sign onto the Access Point you’ve selected, as shown in Figure 5-4. Enter the Password you’ve assigned. If none has been assigned, enter the default password: admin. Then, click the OK button. (This pass- word can be changed from the Web-based Utility’s Password tab.)

Figure 5-3

Figure 5-4

Figure 5-2

6.As shown in Figure 5-5, the IP Settings screen will appear next. Enter an IP Address, Subnet Mask, and enter a unique access point name for the Access Point appropriate to your network. Then, click the Next button to continue or Back to return to the previous page.

•IP Address. This IP address must be unique to your network. (The default IP address is 192.168.1.250.)

8 9