Wireless-G Bridge for Phone Adapters

15.Connect the power cable of the Bridge to the Power port of the phone adapter or IP phone. Then connect the power adapter to an electrical outlet.

Make sure the Bridge’s Ethernet and Wireless LEDs are solidly lit or flashing. Click Next to proceed, or click Back to return to the previous screen.

Figure 4-18: Connect the Attached Bridge Power Cable

to the Phone Adapter Screen

16.Make sure your cable connections match the cable connections shown on-screen. Click Next to proceed, or click Back to return to the previous screen.

Figure 4-19: Wireless is Now Active Screen

Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters

15

Running the Setup Wizard

Page 20
Image 20
Linksys WBP54G manual Wireless is Now Active Screen