Linksys WBP54G manual Check for Compatibility Screen

Wireless-G Bridge for Phone Adapters

3.This screen will inform you about which Linksys phone adapters and IP phones work with the Bridge. Make sure your phone adapter or IP phone is listed on-screen. Click Next to proceed with the installation process, or click Back to return to the previous screen. To exit the Setup Wizard, click Exit.

NOTE: The power adapter for your Linksys phone adapter or IP phone will be used to power the Bridge.

Figure 4-3: Check for Compatibility Screen

4.You will use the PC running this Setup Wizard to set up the Bridge. Disconnect the power jack from the back of the Linksys phone adapter or IP phone. (You will use this power adapter to power the Bridge.) If your network router or this PC is in a different room, disconnect the power adapter from the electrical outlet. Move the power adapter and Bridge to the room where your router or PC is located.

Click Next to proceed, or click Back to return to the previous screen.

Figure 4-4: Disconnect the Power from the Phone

Adapter or IP Phone Screen

Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters 8

Running the Setup Wizard