Linksys WET200 Specifications, Setup/Config, Management, Operating Modes, Wireless, Security

Models: WET200

1 3
Download 3 pages 10.7 Kb
Page 2
Image 2
Features

Features

5 port 10/100 Base-T Ethernet Managed Switch, Autosensing half/full duplex & MDI/MDI-X

Supports 802.11b and 802.11g wireless connection to Access Point

Easy installation and configuration Web Interface

Supports WEP, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2- ENT wireless encryption

Supports 802.1X, EAP-TLS, PEAP authentication with Radius server

SMA detachable Dipole antennas with 1x2 MIMO to increase coverageSupports Power over Ethernet (PoE) or external DC power

Supports SNMP and intuitive Web-based interface

Support 802.1Q and port- based VLAN on LAN switch - 1 VLAN bridged over wireless

Support 802.1p, IP TOS, and DSCP based QoS on LAN switch, WMM on wireless Tx

Support Rate Limiting on both wired switch and wireless interfaceSupport Spanning Tree protocol, port mirroring, and MAC-based ACL3 year limited warranty

PRODUCT DATA

BUSINESS SERIES

Wireless-G Business Ethernet Bridge

Specifications

Model

WET200

Standards

IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, IEEE802.3af (Power

 

Over Ethernet), 802.1p (QoS priority), 802.1Q (VLAN), 802.1X (Security

 

Authentication), 802.11i - Ready (Security WPA2), 802.11e - Ready (Wireless QoS)

Ports

5x 10/100 Base-T Ethernet, 12 VDC Power

Buttons

Reset

Cabling Type

UTP CAT 5

LEDs

Power, POE, Wireless, Ethernet 1-5

Operating System

Linux

Setup/Config

WebUIBuilt in Web UI for Easy browser-based configuration (HTTP/HTTPS)

Management

SNMP Version

SNMP Version 1, 2c, 3

Web F/W upgrade

Firmware Upgradable Through Web-Browser

DHCP

DHCP Client

Operating Modes

Wireless ClientInfrastructure or Ad-Hoc

Wireless

Spec/Modulation

Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM

Channels

Operating Channels: 11 North America, 13 Most of Europe (ETSI and Japan)

# of Internal Ant.

None

# of External Ant.

2 (Omni-Directional) SMA detachable

Transmit Power

Transmit Power (Adjustable) @ Normal Temp Range:

 

11b: 12 ± 1 dBm; 11g: 16 ± 1 dBm

Antenna Gain in dBi

2

Receiver Sensitivity

11g: 54Mbps@ -69dBm, 11b: 11Mbps@ -82dBm

Security

WEP/WPA/WPA2

WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT

Access Control

MAC-Based ACL between wired and wireless interfaces

802.1X

IEEE 802.1X support

Quality of Service

 

QoS

4 queues

 

Queue mapping on ingress based on default priority, 802.1p tag, DSCP & IP ToS

 

Rate limiting on both ingress and egress direction

General

 

 

16 VLAN groups

 

256 MAC address entries across wireless bridge

 

1024 MAC address entries in the switch

Environmental

 

Dimensions

6.69" x 8.07" x 7.68" (170 x 205 x 195 mm)

Weight

12.17 oz (345 g)

Power

12V 0.5A DC input, and IEEE802.3af Compliant PoE

 

Max. power draw: 4.2 Watt

Certification

FCC, ICES-003, CE

Operating Temp.

32ºF to 104ºF (0ºC to 40ºC)

Storage Temp.

-4ºF to 158ºF (-20ºC to 70ºC)

Operating Humidity

10% to 85% Non-Condensing

Storage Humidity

5% to 90% Non-Condensing

Page 2
Image 2
Linksys WET200 Specifications, Setup/Config, Management, Operating Modes, Wireless, Security, Quality of Service, General