Manuals / Linksys / Computer Equipment / Network Card

Linksys WMP54G manual Profiles, Profile Information

Models: WMP54G

1 67

Download 67 pages 42.08 Kb

Page 34

Profiles

Wireless-G PCI Adapter

If the network has PSK2 wireless security enabled, then you will see the PSK2 Needed for Connection screen. Enter the network’s Passphrase or pre-shared key in the Passphrase field. To connect to the network, click Connect. To cancel the connection, click Cancel.

Profiles

The Profiles screen lets you save different configuration profiles for different network setups. The table on the left displays a list of available profiles with their profile names and SSIDs.

Profile - The name of the profile is displayed here.

SSID - The SSID or unique name of the wireless network is displayed here.

Profile Information

For each profile selected, the following are listed:

Wireless Mode - This is the mode of the wireless network currently in use.

Channel - This is the channel to which the wireless network devices are set.

Security - The status of the wireless security feature is displayed here.

Authentication - The authentication setting for the network is shown here.

Connect - To connect to a wireless network using a specific profile, select the profile, and click the Connect button.

New - Click New to create a new profile. See the next section, “Creating a New Profile,” for detailed instructions.

Edit - Select the profile you want to change, and then click Edit.

Import - Click Import to import a profile that has been saved in another location. Select the appropriate file, and click the Open button.

Export - Select the profile you want to save in a different location, and click Export. Direct Windows to the appropriate folder, and click the Save button.

Delete - Select the profile you want to delete, and then click Delete.

NOTE: If you want to export more than one profile, you have to export them one at a time.

Chapter 4: Using the Wireless Network Monitor

Figure 4-12: PSK2 Needed for Connection

Figure 4-13: Profiles

Figure 4-14: Import a Profile

29

Profiles

Image 34

Contents

User Guide Wireless- GWIRELESS PCI AdapterCopyright and Trademarks How to Use This User Guideword definition Table of Contents List of Figures Figure 3-31 Confirm New Settings Figure 4-32 Wireless Security - WEP Welcome Chapter 1 Introductionadapter a device that adds network functionality to your PC What’s in this Guide? Chapter 1 Introduction Wireless-G PCI AdapterAppendix I Contact Information What’s in this Guide?Network Topology Chapter 2 Planning your Wireless Networkssid your wireless networks name RoamingNetwork Layout Wireless-G PCI AdapterChapter 2 Planning your Wireless Network router a networking device that connects multiple networks togetherChapter 3 Setting up and Connecting the USB Network Adapter Starting the Setup WizardInstalling the Adapter Setting Up the Adapter Setting Up the Adapter with Secure Easy Setup NOTE You can only add one Secure Easy Setup device at a time changes, refer to Chapter 4 Using the Wireless Network MonitorSetting Up the Adapter with Available Networks encryption encoding data transmitted in a networkWPA-Personal Needed for Connection changes, refer to Chapter 4 Using the Wireless Network Monitor Figure 3-15 The Congratulations ScreenSetting Up the Adapter with Manual Setup Click Next to continue or Back to return to the previous screen encryption encoding data transmitted in a network WPA Personal PSK2EAP-TLS WPA EnterprisePEAP RADIUS LEAP Page Wireless Network Status screen Chapter 4 Using the Wireless Network MonitorAccessing the Wireless Network Monitor Link Information ScreensWireless Network Status Wireless Network Statistics Secure Easy Setup Wireless-G PCI Adapter 2. Press the Cisco logo or Secure Easy Setup button on the wireless router or access point. When it turns white and begins to flash, click the Next button on the Setup Wizard screen. The logo or button will stop flashing on the wireless router or access point when the Adapter has been successfully added to the network. Repeat this procedure for any additional Secure Easy Setup deviceSite Survey Site InformationProfiles Profile InformationCreating a New Profile Setting Up the Adapter with Secure Easy Setup Wireless-G PCI Adapter 6. Press the Cisco logo or Secure Easy Setup button on the wireless router or access point. When it turns white and begins to flash, click the Next button on the Setup Wizard screen. The logo or button will stop flashing on the wireless router or access point when the Adapter has been successfully added to the network. Repeat this procedure for any additional Secure Easy Setup deviceSetting Up the Adapter with Available Networks WPA-Personal Needed for Connection Setting Up the Adapter with Manual Setup IP Address - This IP Address must be unique to your network Click Next to continue or click Back to change any settings Page WPA Personal PSK2EAP-TLS WPA EnterprisePEAP EAP-TLS RADIUSPEAP LEAP Figure 4-40 Confirm New Settings Common Problems and Solutions Appendix A Troubleshooting1. The Wireless-G PCI Adapter does not work properly What is the IEEE 802.11g standard? Can I play computer games with other members of the wireless network?What is the IEEE 802.11b standard? What IEEE 802.11b features are supported?What is roaming? What is ad-hoc mode?What is infrastructure mode? What is ISM band?What is WPA? What is DSSS? What is FHSS? And what are their differences?What is WEP? What is RADIUS?Appendix B Using Windows XP Wireless Configuration Figure B-4 Available Wireless Network Figure B-5 No Wireless Security Figure B-7 Wireless Network Connection The installation of the Windows XP Wireless Configuration is completeFigure B-6 Network Connection - Wireless Security Wireless-G PCI AdapterSecurity Precautions Appendix C Wireless SecuritySecurity Threats Facing Wireless Networks 1. Disable Broadcast 2. Make it unique 3. Change it often WPA-Personal. If you do not have a RADIUS server, Select the type of algorithm, TKIP or AES, and enter a password in the Passphrase field of 8-63 characters Shared Resources Appendix D Windows HelpTCP/IP Network Neighborhood/My Network PlacesAppendix E Glossary Encryption - Encoding data transmitted in a network Router - A networking device that connects multiple networks together Appendix F Specifications 802.11b CCK 11 Mbps, DQPSK 2 Mbps, DBPSK 1 MbpsAppendix G Warranty Information Appendix H Regulatory Information EN 300-328-1, EN 300-328-2 Technical requirements for Radio equipment Appendix I Contact Information