Chapter 2
Disassembly & Assembly Process
2-1 Equipment Needed & Product Overview
1.Screw Bit (+): 105
2.Screw Bit (+): 107
3.Screw Bit
4.Hex Sleeves 5mm
5.Long Nose Nipper
6.Tweezers
7.Projector
*Before you start: This process is protective level II. Operators should wear electrostatic chains.
*Note: - If you need to replace the Main Board, you have to get into Service Mode and record the lamp usage hour, please refer to section
-As the process of X1161/ X1161A/X1161N/X110/H5360 disassembling is the same as X1261, we take X1261 for example here.
X1161/X1261/X1161A/X1161N/X110/H5360 
Confidential
2-
