No | Symptom | Procedure | |
| - An unique Universal Password which is printed on the | ||
| Security Card. This unique password is a back door of | ||
| Administrator Password which will be accepted by projector | ||
| anytime no matter what the Administrator Password is. | ||
| - If you forget the Password, please do the following steps to get | ||
| the Universal Password: | ||
| (1) | Click the "AcerSNID" | |
|
|
|
|
|
|
|
|
| (2) | Input SNID number. (SNID number is on the Security Card) |
Forgetting Password
15(administrator
Password)
(3) Click "Calculate". Then the Universal Password will appear.
|
| - Please confirm whether the SNID number of Service Mode | |
|
| is the same as the SNID number on the backside of projector? | |
|
| - If not, please do the actions as below: | |
| Universal Password | a. Execute the EDID Upgrade Procedure (refer to Chapter 6) | |
16 | b. Execute | ||
Failure | |||
| to | ||
|
| ||
|
| c. Press "Power", "Left", "Left" and "Menu" buttons sequentially | |
|
| on remote controller to get into Service Mode to obtain the | |
|
| SNID number, then calculate the Universal Password. |
X1161/X1261/X1161A/X1161N/X110/H5360 Confidential
3-