Linksys WRK54G (EU/LA) manual Front Panel, Dmz

Wireless-G Broadband Router

The Front Panel

The Router’s LEDs, where information about network activity is displayed, are located on the front panel.

Figure 3-2: The Broadband Router’s Front Panel

Power	Green. The Power LED lights up and will stay on while the Router is powered on. When the
	Router goes through its self-diagnostic mode during every boot-up, this LED will flash. When
	the diagnostic is complete, the LED will be solidly lit.
DMZ	Green. The DMZ LED indicates when the DMZ function is being used. This LED will remain lit
	as long as DMZ is enabled.
WLAN	Green. The WLAN LED lights up whenever there is a successful wireless connection. If the LED
	is flashing, the Broadband Router is actively sending or receiving data over the network.
1, 2, 3, 4	Green. These numbered LEDs, corresponding with the numbered ports on the Broadband
	Router’s back panel, serve two purposes. If the LED is continuously lit, the Broadband Router
	is successfully connected to a device through that port. A flashing LED indicates network
	activity over that port.
Internet	Green. The Internet LED lights up when there is a connection made through the Internet port.

Chapter 3: Getting to Know the Wireless-G Broadband Router 7

The Front Panel