Manuals / Linksys / Computer Equipment / Network Router

Linksys WTR54GS manual Setup Tab Advanced Routing

Models: WTR54GS

1 86
Download 86 pages 23.9 Kb
Page 24
Image 24

Wireless-G Travel Router with SpeedBooster

The Setup Tab - Advanced Routing

This tab is used to set up the Router’s advanced functions. Operating Mode allows you to select the type(s) of advanced functions you use. Dynamic Routing will automatically adjust how packets travel on your network. Static Routing sets up a fixed route to another network destination.

NAT (Network Address Translation). NAT technology translates IP addresses of a local area network to a different IP address for the Internet. To enable NAT, click Enabled. To disable NAT, click Disabled.

Dynamic Routing (RIP). This feature enables the Router to automatically adjust to physical changes in the network’s layout and exchange routing tables with the other router(s). The Router determines the network packets’ route based on the fewest number of hops between the source and the destination. This feature is Disabled by default.

Static Routing. A static route is a pre-determined pathway that network information must travel to reach a specific host or network. To set up a static route between the Router and another network, enter the information described below to set up a new static route by clicking the Add New Entry button to add an entry. Click the Update Selected Entry button to change an existing entry. (Click the Delete button to delete a static route.)

Destination LAN IP. The Destination LAN IP is the address of the remote network or host to which you want to assign a static route. Enter the IP address of the host for which you wish to create a static route. If you are building a route to an entire network, be sure that the network portion of the IP address is set to 0. For example, the Router’s standard IP address is 192.168.16.1. Based on this address, the address of the routed network is 192.168.16, with the last digit determining the Router’s place on the network. Therefore you would enter the IP address 192.168.16.0 if you wanted to route to the Router’s entire network, rather than just to the Router.

Subnet Mask. The Subnet Mask determines which portion of a Destination LAN IP address is the network portion, and which portion is the host portion. For example, a network may have the Subnet Mask of 255.255.255.0. This determines (by using the values 255) that the first three numbers of a network IP address identify this particular network, while the last digit (from 1 to 254) identifies the specific host.

Default Gateway. This is the IP address of the gateway device that allows for contact between the Router and the remote network or host.

Interface. This interface tells you whether the Destination IP Address is on the LAN & Wireless (Ethernet and wireless networks) or the Internet (WAN). From the drop-down menu, you can also select LAN & Wireless, which performs dynamic routing over your Ethernet and wireless networks. You can also select WAN, which performs dynamic routing with data coming from the Internet. Finally, selecting Both enables dynamic routing for both networks, as well as data from the Internet.

Chapter 5: Configuring the Wireless-G Travel Router with SpeedBooster

Figure 5-15: Setup Tab - Advanced Routing

18

The Setup Tab - Advanced Routing

Page 23 Page 25
Page 24
Image 24
Linksys WTR54GS manual Setup Tab Advanced Routing
Page 23 Page 25

WTR54GS specifications

The Linksys WTR54GS is a robust wireless router that combines performance and ease of use for home and small office networks. With its sleek design and advanced technology, it caters to users seeking reliable connectivity for multiple devices. One of its standout features is the Wireless-G technology, which provides a maximum data transfer rate of up to 54 Mbps. This makes it ideal for streaming videos, online gaming, and facilitating smooth internet browsing.

The WTR54GS supports 802.11g standards, ensuring compatibility with a wide range of devices, including laptops, smartphones, and tablets. It also supports backward compatibility with 802.11b devices, which is essential for users with older equipment. Enhanced by SpeedBooster technology, the WTR54GS improves performance by increasing the range and speed of the wireless connection, which is particularly beneficial in larger homes or offices where signal strength might be a concern.

Security is a top priority for the Linksys WTR54GS, offering robust features such as WEP, WPA, and WPA2 encryption protocols. This ensures that users can maintain a secure connection while protecting sensitive data from unauthorized access. Additionally, the router features a built-in firewall that helps defend against potential intrusions, providing an added layer of security for the network.

Equipped with four Ethernet ports, the WTR54GS enables users to connect wired devices for more stable and faster connections. This is particularly useful for activities that require high bandwidth, such as video conferencing or online gaming. The router also includes an intuitive web-based setup interface, allowing users to configure and manage their network settings effortlessly.

Another notable characteristic of the Linksys WTR54GS is its support for Quality of Service (QoS) features, which prioritize bandwidth for important applications, ensuring that critical tasks receive the necessary resources for optimal performance. This is particularly useful for households with multiple users and devices competing for bandwidth.

Overall, the Linksys WTR54GS is a versatile and reliable router that provides excellent performance for various networking needs. With its combination of speed, security, and user-friendly features, it remains a popular choice for those looking to enhance their wireless networking experience.