Manuals / Linksys / Computer Equipment / Network Router

Linksys WTR54GS manual To start over, I need to set the Router to factory default

Models: WTR54GS

1 86
Download 86 pages 23.9 Kb
Page 54
Image 54

Wireless-G Travel Router with SpeedBooster

11.To start over, I need to set the Router to factory default.

Hold the Reset button for 8 seconds and then release it. This will return the password, forwarding, and other settings on the Router to the factory default settings. In other words, the Router will revert to its original factory configuration.

12.I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, you need to go to the Linksys website and download the latest firmware at www.linksys.com/international.

Follow these steps:

1.Go to the Linksys website at www.linksys.com/international and download the latest firmware.

2.To upgrade the firmware, follow the steps in “Appendix C: Upgrading Firmware.”

13.The firmware upgrade failed, and/or the Power LED is flashing.

The upgrade could have failed for a number of reasons. Follow these steps to upgrade the firmware and/or make the Power LED stop flashing:

•If the firmware upgrade failed, use the TFTP program (it was downloaded along with the firmware). Open the pdf that was downloaded along with the firmware and TFTP program, and follow the pdf’s instructions.

•Set a static IP address on the PC; refer to “Problem #2, I need to set a static IP address.” Use the following IP address settings for the computer you are using:

IP Address: 192.168.16.50

Subnet Mask: 255.255.255.0

Gateway: 192.168.16.1

•Perform the upgrade using the TFTP program or the Administration tab of the Router’s web-based utility.

14.My DSL service’s PPPoE is always disconnecting.

PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a period of inactivity, just like a normal phone dial-up connection to the Internet.

•There is a setup option to “keep alive” the connection. This may not always work, so you may need to re- establish connection periodically.

1.To connect to the Router, go to the web browser, and enter http://192.168.16.1 or the IP address of the Router.

2.Enter the password, if asked. (The default password is admin.)

3.On the Setup screen, select the option Keep Alive, and set the Redial Period option at 20 (seconds).

4.Click the Save Settings button.

5.Click the Status tab, and click the Connect button.

6.You may see the login status display as Connecting. Press the F5 key to refresh the screen, until you see the login status display as Connected.

•Click the Save Settings button to continue.

•If the connection is lost again, follow steps 1- 6 to re-establish connection.

Appendix A: Troubleshooting

48

Common Problems and Solutions

Page 53 Page 55
Page 54
Image 54
Linksys WTR54GS manual To start over, I need to set the Router to factory default, Need to upgrade the firmware
Page 53 Page 55

WTR54GS specifications

The Linksys WTR54GS is a robust wireless router that combines performance and ease of use for home and small office networks. With its sleek design and advanced technology, it caters to users seeking reliable connectivity for multiple devices. One of its standout features is the Wireless-G technology, which provides a maximum data transfer rate of up to 54 Mbps. This makes it ideal for streaming videos, online gaming, and facilitating smooth internet browsing.

The WTR54GS supports 802.11g standards, ensuring compatibility with a wide range of devices, including laptops, smartphones, and tablets. It also supports backward compatibility with 802.11b devices, which is essential for users with older equipment. Enhanced by SpeedBooster technology, the WTR54GS improves performance by increasing the range and speed of the wireless connection, which is particularly beneficial in larger homes or offices where signal strength might be a concern.

Security is a top priority for the Linksys WTR54GS, offering robust features such as WEP, WPA, and WPA2 encryption protocols. This ensures that users can maintain a secure connection while protecting sensitive data from unauthorized access. Additionally, the router features a built-in firewall that helps defend against potential intrusions, providing an added layer of security for the network.

Equipped with four Ethernet ports, the WTR54GS enables users to connect wired devices for more stable and faster connections. This is particularly useful for activities that require high bandwidth, such as video conferencing or online gaming. The router also includes an intuitive web-based setup interface, allowing users to configure and manage their network settings effortlessly.

Another notable characteristic of the Linksys WTR54GS is its support for Quality of Service (QoS) features, which prioritize bandwidth for important applications, ensuring that critical tasks receive the necessary resources for optimal performance. This is particularly useful for households with multiple users and devices competing for bandwidth.

Overall, the Linksys WTR54GS is a versatile and reliable router that provides excellent performance for various networking needs. With its combination of speed, security, and user-friendly features, it remains a popular choice for those looking to enhance their wireless networking experience.