Linn Akurate DS owner manual Operation, Playing music, Selecting music

OPERATION

Playing music

If you are using a Linn Akurate Kontrol pre-amplifier with the Akurate DS, switch on the Akurate Kontrol first and wait for it to show the (standby) symbol before powering-up the Akurate DS. When the Akurate DS is switched on, a flashing dot will appear on the display. Wait until the dot is

replaced by the symbol before following the steps below.

Selecting music

1.Turn on your control device. If the Linn GUI does not run automatically, double-click the Linn GUI icon.

2.From the Room window, select the appropriate room. This will automatically bring your Akurate DS (and Akurate Kontrol) out of standby.

3.From the Source window, select ‘Akurate DS’.

3

4.From the Library window, select the storage device that contains the music you want to listen to by tapping it twice.

AKURATE DS