NAME
You are able to give the source a name which will be shown on the display when that source is selected.
To change the flashing character:
•Repeatedly press or hold 
/
on the handset or front panel.
The following characters are available: A to Z, 0 to 9, space.
To move to the next or previous character:
• Press 
or 
.
When you have finished inputting the name, press 
or SELECT.
Default setting: (name of back panel connector, ‘AKURATE CD’ or ‘PHONO’)
Note:
The name can be up to twelve characters long.
TYPE
Select a type for this source. These are the types that are shown in blue above the bottom two rows of keys on the handset.
Options: DVD, CD, AUX (auxiliary), TUNER, TV, DIGITAL, PHONO,
SAT (satellite), NONE
Default setting: AUX (Except for inputs ANALOG 1 which is set to CD, ANALOG 6 which is set to PHONO, and ANALOG GROUP which is set to NONE.)
Note:
The type for the Linn Disc source (see Linn Disc setup, page 13) is DVD. It is not possible to change the type for this source.
VOLUME OFFSET
Volume Offset is for adjusting the volume of a source in comparison to other sources. You may want to adjust Volume Offset if, for example, your tuner sounds quieter than your CD player when played at the same volume setting.
Range:
Default setting: 0
SAT (satellite) SOURCE - applies to digital sources only
Set to YES if this source is a satellite or cable TV receiver. Setting to YES will stabilise the audio signal when the channel on the receiver is being changed. Set to NO if this source is not a satellite or cable TV receiver.
Options: YES, NO
Default setting: NO
SURROUND CHANNELS
If you are setting up the ANALOG GROUP source, or are adding a Linn UNIDISK player and have a 7.1 loudspeaker configuration, you are able to select whether to use your side surround or back surround loudspeakers when listening to a 5.1 channel audio source.
Set to SURROUND to send the surround audio signal to your side surround loudspeakers.
Set to SURROUND BACK to send the surround audio signal to your back surround loudspeakers.
Default setting: SURROUND
Select SAVE to save your changes and return to the SOURCE SETUP menu.
Select BACK to return to the SOURCE SETUP menu without saving changes.
ENGLISH
AKURATE KONTROL 9
