ENGLISH

Notes on the list of sources:

NO SOURCE: No record path will be set.

KNEKT: When a record path on the AKURATE KONTROL is being used, this setting will allow users of a KNEKT Line Driver system to change the source they are listening to (which also changes the record path). To protect a record path, select the required record option. Once recording has finished, reselect the KNEKT option.

The available record modes are:

Option

Information

 

 

LtRt 44.1 kHz

Choose the option that suits your recording device’s

LtRt 48 kHz

operating frequency. (With these options, multi-channel

signals are downmixed to two channels)

LtRt 88.2 kHz

 

LtRt 96 kHz

 

LtRt As Input

Output frequency is the same as the input frequency,

 

and multi-channel signals are downmixed to two

 

channels

Bit Perfect

Output frequency is the same as the input frequency

 

and there is no processing of the signal

 

 

Analog

Passes audio signals to the analogue outputs

 

 

Notes:

The audio signal from the selected source is routed to either all of the analogue and/or all of the digital outputs simultaneously. It is not necessary to specify which output your recording device is connected to.

The available record modes are dependent on whether the input signal is analogue or digital.

For reasons of copyright protection some audio and video discs incorporate systems that prevent them from being recorded.

24AKURATE KONTROL

Page 32
Image 32
Linn Akurate Kontrol Pre-Amplifier owner manual Signals are downmixed to two channels