Linn Akurate Kontrol Pre-Amplifier Linn Disc setup, Stop Bits, RS232 EVENTS, ANALOG 6 TYPE

STOP BITS

Set the stop bits to suit the RS232 protocol being used.

Options: 1, 2

Default setting: 1

RS232 EVENTS

If set to ENABLED, the unit passes information regarding its internal status to an external device that accepts RS232 data.

Options: ENABLED, DISABLED

Default setting: DISABLED

Select SAVE to save your changes and return to the GENERAL SETUP menu.

Select BACK to return to the GENERAL SETUP menu without saving changes.

Select EXIT to leave setup (if changes have been made and SAVE has not been selected, you will be prompted to save or not save the changes).

ANALOG 6 TYPE

This item informs you of the setting for the internal phono stage (connected to the 6/PHONO input). Either PHONO MM (moving- magnet), PHONO MC (moving-coil) or LINE LEVEL will be displayed. If the internal phono stage is reconfigured, the shown setting will update automatically.

Select SAVE to save your changes and return to the GENERAL SETUP menu.

Select BACK to return to the GENERAL SETUP menu without saving changes.

Select EXIT to leave setup (if changes have been made and SAVE has not been selected, you will be prompted to save or not save the changes).

Linn Disc setup

This menu is for use if you are adding a Linn AKURATE CD player as a multi-channel source, or a UNIDISK player (see pages 14 to 16).

ANALOG SOURCE

Options: ANALOG GROUP, ANALOG 1 to 6, NONE

Default setting: NONE

DIGITAL SOURCE

Options: SPDIF 1 to 3, TOS (TOSLINK) 1 to 3, NONE

Default setting: NONE

Select SAVE to save your changes and return to the MAIN MENU.

Select BACK to return to the MAIN MENU without saving changes.

Select EXIT to leave setup (if changes have been made and SAVE has not been selected, you will be prompted to save or not save the changes).

Notes:

If an AKURATE CD player is used as the Linn Disc source, the name for the source as shown on the front panel will be ‘LINN DISC’, not ‘AKURATE CD’.

If a Linn AKURATE CD or UNIDISK player is not connected to the AKURATE KONTROL using the supplied RS232 lead (see pages 14 to 16), ‘LINN DISC’ will not be seen on the front panel as an available source.

If the input you wish to use is not shown when you cycle through the options, it is because that input has already been assigned to a source. To correct this, enter the Source setup menu, select the back panel input you require, set Type to NONE, then save the change. When you re-enter the Linn Disc setup menu the new input will be available.

AKURATE KONTROL 13

ENGLISH

ENGLISH