TURNTABLE MAINTENANCE
The BASIK is designed for a long operational life. To preserve the appearance and maintain the performance of your dock, you should note the following points:
OUTER PLATTER | Clean with a soft, dry cloth. DO NOT use any abrasive cleaner as this will remove the |
| protective lacquer and cause corrosion. |
MAT | The felt mat can be cleaned with masking tape. |
MOTOR | The motor pulley should be cleaned periodically. Remove the outer platter and belt, |
| and gently clean with a cloth impregnated with isopropyl alcohol or other |
| solvents. |
PLINTH | This can be cleaned with a light duster or slightly damp cloth - make sure the |
| stylus guard is in place before you start. If you have to remove an oil slain from the |
| plinth, use a soft cloth and solvent. |
OIL | The oil supplied for the bearing provides |
| the bearing housing it must only be replaced by |
| from your Linn dealer. The turntable should never be operated without oil. |
LID | The best method is to remove any dust with a damp cloth without any rubbing action |
| and then use a soft duster. Lids are more often damaged by cleaning than in use. |