Linn Klout owner manual Output Connections

CAUTION When passively bi-amping or tri-amping loudspeakers remove any connecting links that are at the speaker input terminals. Failure to do this will short the amplifier outputs together and may damage the power amplifier.

OUTPUT CONNECTIONS

Connection of the KLOUT to the loudspeakers should be made with a good quality cable. We recommend the use of Linn K series speaker cable and Linn KNEKT speaker plugs.

Linn speaker cable is marked with the Linn logo to indicate directionality. The cable should be connected to the amplifier with the logo pointing towards the loudspeaker.

Ensure that the wiring is correct. The red socket is positive and the black is negative. The positive wire (red connector) is identified by a rib along the side of the K20 cable.

NOTE When using the Linn KAIRN pre-amplifier, or another phase inverting pre-amplifier, the signal to the KLOUT is inverted. Therefore, to maintain absolute phase, connect the positive output of the KLOUT to the negative (black) loudspeaker terminal, and the negative output to the positive (red) loudspeaker terminal.

6