Linn Klout owner manual Additional Connections, Mains Connection, Operation

ADDITIONAL CONNECTIONS

To operate the KLOUT via the KAIRN, connect the KAIRN REMOTE IN socket to the KLOUT REMOTE OUT socket. Additional KLOUTs can be chained using phono-phono interconnects from the REMOTE IN socket of one KLOUT to the REMOTE OUT socket of the next KLOUT.

MAINS CONNECTION

WARNING The KLOUT must be switched off and disconnected from the mains before checking the fuse.

The KLOUT will be fitted with the correct fuse by your dealer. Before plugging into the mains, check that the voltage selected is correct for the country of use. To set the voltage, rotate the voltage selector on the underside of the product until the appropriate voltage is aligned with the white marker.

OPERATION

The KLOUT can be switched on either manually or via the KAIRN mains switch. A three-way switch is positioned on the back panel of the KLOUT.

To switch the KLOUT on manually, press the switch to the ON position. The indicators will light red, there will be a click and after a few seconds, when the power supplies are stabilised, the indicators will light green showing the KLOUT is ready for use.

To control the KLOUT from the KAIRN, press the switch on the KLOUT to STANDBY Switch the KAIRN on. After a few seconds there will be a click from the KLOUT, the indicators will light red then, after a few more seconds, green. The KLOUT is ready for use.

7