English Cleaning, Operating modes and Parameters
Cleaning
Disconnect the KOMPONENT 120 loudspeaker from the power supply before cleaning.
Remove dust and fingerprints with a soft, dry cloth. Avoid using domestic cleaning products on the unit.
Operating modes
| SYMBOL | MODE | MEANING |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Standby | The unit is waiting for an audio signal |
| ||
|
|
|
|
|
|
|
|
| In this mode the unit consumes |
|
|
|
|
|
|
|
|
|
| minimal power. The unit will enter |
|
|
|
|
|
|
|
|
|
| standby mode ten minutes after audio |
|
|
|
|
|
|
|
|
|
| input ceases. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| On |
|
| The unit is fully |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| The unit will enter this mode as soon |
|
|
|
|
|
|
|
|
|
| as it receives an audio signal. |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Thermal |
|
| The unit has overheated |
|
|
|
|
|
|
| Standby |
|
| During very demanding, sustained use |
|
|
|
|
|
|
|
|
|
| the unit will go into Thermal Standby |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| mode in order to allow itself to cool |
|
|
|
|
|
|
|
|
|
| down. When in this mode the unit will |
|
|
|
|
|
|
|
|
|
| not produce any sound. The unit will |
|
|
|
|
|
|
|
|
|
| return to On mode when its |
|
|
|
|
|
|
|
|
|
| temperature has dropped to its |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| operating level. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KOMPONENT 120
Parameters
The KOMPONENT 120 loudspeaker is equipped with four adjustable parameters (features) that enable you to alter its performance to suit your taste.
NOTE:
The parameters can only be adjusted when the KOMPONENT 120 loudspeaker is not in standby mode.
UP DOWN FEATURE
Adjusting the parameters
To select the parameter you wish to adjust:
●Hold FEATURE.
●Repeatedly press UP or DOWN until the letter for the desired parameter appears.
●Release FEATURE.
●Repeatedly press UP or DOWN to change the setting.
NOTE:
A few seconds after releasing the last key, the display changes to
To restore the factory defaults:
●Disconnect the KOMPONENT 120 loudspeaker from the mains supply and wait for the display to go blank.
●While holding FEATURE reconnect the mains supply.
●Continue to hold FEATURE until the display shows
Owner’s Manual | 4 |
|