English Unpacking, Voltage selection and Positioning
Unpacking
The KOMPONENT 120 loudspeaker is supplied with the following accessories:
●mains lead
●phono lead
●
●spike kit
●set of floor protectors
●warranty card
●this manual
●wall bracket assembly instructions
We recommend that you retain the packaging in case you need to transport the KOMPONENT 120 loudspeaker at a later date.
Voltage selection
WARNING – Ensure the mains supply is disconnected.
The KOMPONENT 120 is
UP DOWN FEATURE
Positioning
The KOMPONENT 120 loudspeaker can be placed anywhere you find convenient, but please consider the following points:
●For best results, position your KOMPONENT 120 loudspeaker as close as possible to either your left front or right front loudspeaker. It can be
●Experimenting with the position may be necessary in order to match the sound of the KOMPONENT 120 loudspeaker with other loudspeakers in your system and the acoustics of the room.
Whichever mounting method you employ, ensure that the KOMPONENT 120 is held or positioned rigidly, in order to ensure that the movement of the drive units is converted to sound energy, rather than cabinet movement (in the form of vibration, wobble etc.).
Replacing the fuse in the KOMPONENT 120 speaker
Should the mains fuse blow, replace it only with an equivalent part (see table below). The fuse holder is located just below the mains inlet socket. To replace the fuse, disconnect the product from the mains supply, remove the fuse using a flat blade screwdriver, insert a new fuse. If the fuse blows a second time there is a fault in the product; contact your local retailer.
Fuse selection table
MAINS INPUT VOLTAGE FUSE TYPE
100V | 125V T6.3AL |
115V | 125V T6.3AL |
230V | 250V T3.15AL |
KOMPONENT 120
Owner’s Manual | 2 |
|