Important Safety Instructions

Explanation of symbols used on the rear or underside of the apparatus:

This symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the enclosure of sufficient magnitude to cause electric shock.

This symbol is intended to alert the user to the presence of important operation, maintenance and servicing information in the instruction and service manuals.

For apparatus connected to the mains electricity supply

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER.

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

REPLACE THE MAINS FUSE IN THE PLUG WITH ONE OF THE SAME TYPE AND RATING.

DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

SHOCK HAZARD - DO NOT OPEN.

MAINS PLUGS

This apparatus is supplied with a non-rewireable mains plug for the intended country. Replacement mains leads can be obtained from your Linn retailer. Should you need to change the plug please dispose of it carefully. A plug with bared conductors is dangerous if engaged in a live socket.

The Brown wire must be connected to the Live (Line) supply pin. The Blue wire must be connected to the Neutral supply pin.

The Green/Yellow wire must be connected to the Earth (Ground) supply pin.

Please contact your retailer or a competent electrician if you are in any doubt.

Important Safety Information English

GENERAL SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use the apparatus near water, for example near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool etc.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Site the apparatus so that its location or position does not interfere with its proper ventilation. For example, the apparatus should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings, or placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarised or grounding type plug. A polarised plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and at the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug has been damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Wall or ceiling mounting. Mount the apparatus to a wall or ceiling only as recommended by the manufacturer.

16.Power sources. Connect the apparatus to a power supply only of the type described in the operating instructions or marked on the apparatus.

17.Mains plug. Use the mains plug to disconnect the apparatus from the mains supply. The mains plug must be accessible at all times. Use the mains switch (if applicable) when the apparatus is not in use.

18.Power lines. An outdoor antenna should be located away from power lines.

19.Outdoor antenna grounding. If an outdoor antenna is connected to the apparatus, ensure that the antenna system is grounded to provide some protection against voltage surges and static build up. In the USA see article 810 of the National Electrical Code ANSI/NFPA 70 concerning installation requirements.

20.Telephone line. Do not connect the apparatus to a telephone line except where specifically instructed to do so.

21.Objects and liquid entry. Do not let objects or liquids fall into the apparatus. Do not expose the apparatus to dripping or splashing. Do not place a vessel containing liquid on top of the apparatus.

22.No naked flame sources, such as lighted candles, should be placed on the apparatus.

23.The apparatus has been designed for use in moderate and tropical climates.

KOMPONENT 120

i

Owner’s Manual

Page 2 Page 4
Page 3
Image 3
Linn KOMPONENT 120 owner manual Important Safety Instructions, Important Safety Information English
Page 2 Page 4

KOMPONENT 120 specifications

The Linn KOMPONENT 120 is a premium multi-channel power amplifier that embodies the pinnacle of audio engineering, specifically designed to deliver exceptional sound quality and performance in home theater and multi-room audio systems. This powerful amplifier is engineered to provide lifelike audio reproduction while maintaining the reliability and efficiency necessary for various audio setups.

One of the standout features of the KOMPONENT 120 is its robust construction. Built with an emphasis on longevity and durability, this amplifier utilizes high-quality materials that minimize resonance and vibration, ultimately enhancing sound clarity. The chassis is designed to dissipate heat efficiently, ensuring optimal performance even during prolonged use.

The KOMPONENT 120 boasts a power output of 120 watts per channel (into 8 ohms), making it suitable for driving a range of loudspeakers, from compact bookshelf models to larger floor-standing systems. Its multi-channel configuration allows users to connect multiple speakers, providing a rich surround sound experience ideal for movie watching and music playback.

One of the key technologies employed in the KOMPONENT 120 is Linn's proprietary Dynamik power supply. This advanced power supply technology ensures consistent and stable power delivery across all channels, resulting in reduced distortion and improved transient response. This means that audio signals are reproduced with incredible detail and precision, allowing listeners to hear subtle nuances in their favorite tracks or movie soundtracks.

Another important characteristic of the KOMPONENT 120 is its compatibility with various audio formats and systems. It features comprehensive connectivity options, including RCA and balanced XLR inputs, enabling seamless integration with a variety of source components. The amplifier also supports stereo and surround sound configurations, making it a versatile choice for both music and home theater enthusiasts.

Furthermore, the KOMPONENT 120 emphasizes ease of use. Its intuitive design includes an easy-to-read front panel, allowing users to adjust settings effortlessly. While primarily designed for high-fidelity applications, it can also be utilized in distributed audio systems, satisfying both audiophiles and casual listeners alike.

In conclusion, the Linn KOMPONENT 120 is a powerful and flexible amplifier that combines cutting-edge technologies with premium build quality. Its exceptional performance, robust features, and thoughtful design make it an ideal choice for anyone seeking to elevate their audio experience in home entertainment. Whether for music or cinema, the KOMPONENT 120 consistently delivers sound that immerses and captivates.
Top Page Image Contents