English Setup
DOLBY PRO LOGIC II MUSIC (EXOTIK+DA)
Dolby Pro Logic II is an audio signal processing algorithm that converts a
Dolby Pro Logic II Music is a mode of Dolby Pro Logic II that is particularly suited to music. It features three
Select SAVE to save your changes and return to the AUDIO OPTIONS menu.
Select BACK to return to the AUDIO OPTIONS menu without saving changes.
Select EXIT to leave setup (if changes have been made and SAVE has not been selected, you will be prompted to save or not save the changes).
CENTRE WIDTH
This parameter allows adjustment of the audio signal between the centre loudspeaker and front left and right loudspeakers.
If set to 0 (no spreading) all of the audio signal for the centre channel is sent to the centre loudspeaker.
If set to 3 (neutral) a portion of the centre channel signal is also sent to the left and right front loudspeakers.
If set to 7 (Full Phantom) all of the centre channel signal is split evenly between the front left and right loudspeakers.
Range: 0 to 7
Default setting: 3
PANORAMA CONTROL
If set to ON, the Panorama control extends the audio signal from the front left and right loudspeakers to include the surround left and right loudspeakers. This adds a "wraparound" effect to the sound.
Options: ON, OFF
Default setting: OFF
Select SAVE to save your changes and return to the MAIN MENU.
Select BACK to return to the MAIN MENU without saving changes.
Select EXIT to leave setup (if changes have been made and SAVE has not been selected, you will be prompted to save or not save the changes).
General setup
DISPLAY INTENSITY
Set the brightness of the front panel display.
Options: LOW, MEDIUM, HIGH
Default setting: MEDIUM
DIMENSION CONTROL
This parameter allows you to shift the balance between the front and rear loudspeakers. Positive values move the sound towards the front, negative values towards the rear.
If a recording is too spacious or strong from the surround loudspeakers it can be shifted "forward" to get a better balance. A stereo recording can be shifted "backward" to make the sound more enveloping.
Range:
Default setting: 0 (neutral)
DISPLAY CONTENT
Set what information you want displayed on the unit’s front panel when it is in normal operation.
Options: LAST USED (source or volume), (current) SOURCE AND VOLUME, VOLUME, (current) SOURCE
Default setting: SOURCE AND VOLUME
EXOTIK
Owner’s Manual | 12 |