Listen Technologies LR-200-072 manual 4Channel Select, 5Place Batteries in Unit, LR-LT200-800-072

LR-200-072 Setup Instructions

4Channel Select

Set channel select switch to desired channel (A, E, H). Make sure that the channel on both receiver and transmitter are the same.

Channel Select Switch

5Place Batteries in Unit

Insert two AA batteries making note of the battery polarity shown in the battery compartment, and again verifying that the BATTERY SELECT switch is in the correct position for the batteries you are using. (Alkaline should be selected for all battery types other than NiMH).

NOTE: Listen provides industrial strength AA alkaline batteries (LA-361) and high performance AA Nickel Metal Hydride batteries (LA-362). These may be purchased from your Listen dealer.

72

	lect
Bat	tery Se
	NiMH

Chann el Select Alkaline

-	-
	+	+

+

+

-

-

LR-LT200-800-072

6Connect an Earphone or Headset

Your headset or earphone will connect to the jack on the top of the unit. Either mono or stereo connectors may be used with a Listen receiver. Make certain you push the plug all the way into the jack.

72

VER

RECEI

STANDARD

40