Key Concepts in Value Package Setup
Selecting Transmitting Frequencies
Use this section of the guide to choose the channel settings for the transmitter and receivers.
Find transmission channel(s)
The goal is to find a transmission channel(s) that is free from interference. Interference comes from transmitters and other outside FM signals.
Listen’s
With 3 different channels to choose from, the chance of finding an interference free channel is increased. The best way to check for interference is to turn the
Testing System
Monitor Jack
The headphone jack is used to monitor the mix of input 1 & 2. You can adjust the monitor level with the volume knob. The headphone jack is a standard 3.5 mm jack.
Design Guide
LT- | 03 |
3 Headphone Monitoring Jack
Test Tone
Use the test tone to transmit a 400 Hz tone. This tone will allow the end user to know if the system is transmitting properly. All receivers should be able to hear this tone if tuned to the proper channel.
Test Tone Button
9