Listen Technologies LT-800-216 LT-800Operating Instructions, 1Power Unit On, 2Select a Channel

OperatingPackageInstructionsContents

OperatingPackageSetupQuickSpeciInstructioReferecefiructionscaConte ts

LT-800 Operating Instructions

1Power Unit On

Turn power on by pressing the power button.

2Select a Channel

Select the transmit channel by pressing the channel select UP and DOWN buttons. See Channel Selection on page 14 for more information.

Channel Select UP and DOWN buttons

NOTE: The LT-800 is shipped with only limited channels (Basic Mode). To select from all channels (Expanded Mode) refer to page 12. (for a more detailed description of Basic and Expanded Mode refer to page 12)

3Lock on Channel

Once you determine your transmit channel, you can lock the transmitter on that channel. To lock a channel hold the Channel Select “Up” button for 3 seconds until the padlock icon appears on the display. To unlock, repeat this process and the padlock icon will disappear.

Lock icon

4Test Tone (if necessary)

To broadcast a test tone, press the test tone button. This helps to test receivers when no audio source is available.

Press Test Tone button here

10