EGS-I&S-01

WARNING

Installation is not complete unless a pressure and temperature relief valve is installed into the side of the water heater. See the Water Connections section of this manual for details.

This water heater contains very hot water under high pressure. Do not unscrew any pipe fittings or attempt to disconnect any components of this water heater without positively assuring the water is cool and has no pressure. Always wear protective clothing and equipment when installing, starting up, or servicing this water heater to prevent scald injuries. Do not rely on the pressure and temperature gauges to determine the temperature and pressure of the water heater. This water heater contains components that become very hot. Do not touch any components unless they are cool.

Improper installation, adjustments, alteration, service or maintenance can cause property damage, personal injury or loss of life. Failure to follow all instructions in the proper order can cause personal injury or death. Read and understand all instructions, including all those contained in component manufacturer’s manuals, which are provided with the appliance before installing, starting-up, operating, maintaining, or servicing this appliance. Keep this manual and literature in legible condition and posted near the appliance for reference by owner and service technician.

This water heater requires regular maintenance and service to operate safely. Follow the instructions contained in this manual. Installation, maintenance, and service must be performed only by an experienced, skilled, and knowledgeable installer or service agency.

CAUTION

The maximum boiler water supply temperature to the indirect heat exchanger must not exceed 240°F (116°C).

WARNING

It is the responsibility of the installing contractor to see that all controls are correctly installed and are operating properly when the installation is complete.

DO NOT operate the water heater with jumpered or absent controls or safety devices.

DO NOT tamper with or alter the water heater and/ or controls.

DO NOT operate the water heater if any external part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system that was under water.

This water heater is suitable for installation on combustible flooring. DO NOT install this water heater on carpeting.

DO NOT operate this water heater without first being certain it is filled with water.

Flammable items, pressurized containers, or any other potential fire hazardous articles must never be placed on or adjacent to the heater. Containers of flammable gases should not be stored or used in the same room with this water heater.

Hydrogen gas can be produced in an operating water heater that has not had water drawn from the tank for a long period of time (generally two weeks or more). Hydrogen gas is extremely flammable. To prevent the possibility of injury under these conditions, we recommend that the water faucet be opened for several minutes at the kitchen sink before you use any electrical appliance that is connected to the hot water system. If hydrogen is present, there will be unusual sounds such as air escaping through the pipes as hot water begins to flow. Do not smoke or have open flame near the faucet at the time it is open.

NOTICE

Insulation blankets are not required for this water heater. This water heater meets or exceeds the ASHRAE/IES 90.1b standards with respect to insulation and standby loss requirements.

2

Page 1 Page 3
Page 2
Image 2
Lochinvar EGS-I&S-01 service manual
Page 1 Page 3

EGS-I&S-01 specifications

Lochinvar EGS-I&S-01 is a state-of-the-art heating solution designed to provide efficient and reliable heating for commercial and industrial applications. This advanced equipment incorporates innovative technologies that allow it to deliver superior performance while maintaining environmental sustainability.

One of the key features of the Lochinvar EGS-I&S-01 is its high-efficiency design. It utilizes next-generation condensing technology, which extracts maximum heat from the combustion process. This results in lower greenhouse gas emissions and reduced energy consumption, making the system not only cost-effective but also environmentally friendly. The EGS-I&S-01 boasts an impressive thermal efficiency rating, ensuring that energy is used effectively and reducing the overall operating costs for businesses.

The heating unit is equipped with a smart control system that enhances its operational efficiency. This control system allows for precise temperature regulation, remote monitoring, and advanced diagnostics. Users can modify settings based on specific requirements, optimizing performance while ensuring comfort in the designated space. This level of control also helps in identifying potential issues before they escalate, reducing downtime and maintenance costs.

Another significant characteristic of the Lochinvar EGS-I&S-01 is its versatility. Designed for a wide range of applications, it can efficiently serve different facilities, from large commercial buildings to smaller industrial operations. The modular design allows for easy scalability, enabling businesses to expand their heating capacity as needed without major overhauls.

Safety and reliability are paramount in the design of the EGS-I&S-01. It comes equipped with multiple safety features, including flame monitoring, pressure controls, and temperature sensors. These features ensure that the system operates within safe parameters, providing peace of mind for users.

Moreover, the Lochinvar EGS-I&S-01 is built with durable materials that withstand harsh operating conditions, resulting in a long-lasting investment. With low maintenance requirements, businesses benefit from uninterrupted service and reduced operational disruptions.

In summary, the Lochinvar EGS-I&S-01 represents a significant advancement in heating technology. Its combination of high efficiency, smart controls, versatility, safety features, and durability make it an excellent choice for commercial and industrial applications. With ongoing research and development, Lochinvar continues to push the boundaries of heating solutions, ensuring clients benefit from cutting-edge technologies that drive performance and sustainability.
Top Page Image Contents