![](/images/new-backgrounds/1221356/22135685x1.webp)
Operating additional equipment
Assignment of the digital audio input
In order to be able to hear the digital sound of an external device con- nected to an AV input, an AV input can be assigned to the digital audio input socket AUDIO DIGITAL IN. When switching to this AV input, the digital audio signal applied to the AUDIO DIGITAL IN input is passed on to the upgradable integrated Dolby Digital Decoder and the digital audio output socket AUDIO DIGITAL OUT. You will then hear the digital sound of the assigned AV input instead of the analogue sound if available.
Connecting devices to the digital audio input
For the digital audio playback from an external device, e.g. the DVD player, you have to feed the digital audio signal to the TV set.
The external digital audio signal can be played back via the upgradable Dolby Digital Decoder in the TV set, via an externally connected digital audio amplifier or Loewe Auro.
An external audio amplifier must already be set in the sound components wizard (see page 42).
Call TV menu.
Select Connections,
go to the menu line below.
Select Miscellaneous,
go to the menu line below.
Select Assign digital audio input, go to the menu line below.
Select AV input.
|
| TV menu |
|
|
|
|
|
|
| Connections |
|
|
|
|
|
|
| Miscellaneous |
|
| INFO | END | |
|
| Assign digital audio input |
|
|
|
|
|
| no | to AV1 | to AV2 | to AVS | to HDMI1/DVI |
| to HDM |
To connect a DVD player to the digital audio input of the TV set for example, connect the digital output socket of the DVD player (DIGITAL OUT) via a cinch cable to the AUDIO DIGITAL IN socket on the TV set.
|
|
|
| TV set |
|
|
| AUDIO DIGITAL IN | |
AV1 |
|
|
|
|
DVD player |
|
|
|
|
MULTICHANNEL AUDIO OUT |
|
|
| |
LEFT CENTER LEFT |
|
| I | |
REAR | FRONT |
|
| |
DIGITAL AUDIO OUT |
| STEREO OUT | VIDEO OUT | |
PCM/MPEG2/AC3/DTS |
| |||
MAINS |
|
|
|
|
|
|
|
| II |
|
|
|
| TO |
RIGHT SUBW. RIGHT | R L | (CVBS) | (Y/C) | |
OPT OUT DIG OUT REAR | FRONT | AUDIO | VIDEO OUT |
The DVD player is already logged in at AV1 in the connec- tion wizard at the factory.
If new devices are connected and registered in the connec- tion wizard, the digital audio input AUDIO DIGITAL IN is assigned in the connection wizard (see page 38).
Audio connection in HDMI (DVI) devices
External devices with DVI connection
If an external device with DVI interface is connected to the HDMI1/DVI or HDMI2/DVI socket of the TV set by an HDMI/DVI adapter, you can con- nect the digital sound of the external device to the digital audio input socket AUDIO DIGITAL IN.
The assignment of the digital audio input to the corresponding HDMI socket of the TV set takes place as described in the column on the left.
If you want to use the analogue sound of the external device, connect this to the AUDIO IN1 socket.
External devices with HDMI connection
If external devices with HDMI interface are connected to the HDMI1/DVI or HDMI2/DVI socket of the TV set, no assignment of the audio input is necessary because in HDMI the digital transmission of picture and sound takes place via one connection.
RS-232C interface (upgradable interface)
You can connect either the Loewe Individual Sound Projector or a home network system of different manufacturers (e.g. AMX, Crestron) to your TV set via the
For the configuration of the
43 -