Loewe 32, 42, 37 Select Rotate TV, Basic adjustment right, Basic adjustment left

Operating additional equipment

Rotating the TV set (upgradable interface)

Your TV set can be upgraded with the connection for a rotating foot control. If the set is assembled with a Loewe stand with motor drive, you can align it to suit your sitting position using the remote control.

žžA motor unit is connected.

žžIn normal TV mode, without other displays.

Rotating the TV set.

Do not place any objects in the rotation range of the TV set that could obstruct the rotation or that could be knocked over by the rotation movement.

Setting the range of rotation

You can determine the range of rotation (maximum +/- 40°) of the TV set by setting the maximum right and left stop.

Call TV menu.

Select Settings,

go to the menu line below.

Select Miscellaneous,

go to the menu line below.

Select Rotate TV,

go to the menu line below.

Select Basic adjustment, OK calls the basic adjustment.

Rotate TV

Basic adjustment (right) END

21

OK Proceed

Basic adjustment (right)

Turn your TV set as far to the right as the installation position allows. This will be the maximum right rotation position in future.

OK confirms basic adjustment to right.

Rotate TV
Basic adjustment (left)	END
-30
OK End of basic adjustment

Basic adjustment (left)

Rotate your TV set as fasr to the left as the installation position allows. This will be the maximum left rotation position in future.

OK ends the basic adjustment. Close the menu.

Specifying the switch off position

This is where you specify the position that the TV will take when it is switched off. In order for the TV set to return to the determined switch-off position when switching it off, this must be activated (see below).

Call TV menu.

Select Settings,

go to the menu line below.

Select Miscellaneous,

go to the menu line below.

Select Rotate TV,

go to the menu line below.

Select Set switch-off position, OK calls Set switch-off position.

TV menu

Settings

Miscellaneous

Rotate TV

Set switch-off position INFO END

0

OK Adopt

Set the desired switch-off position.

The TV set rotates in the process.

OK Save the set position as the switch-off position.

Close the menu.

Activating the switch-off position

Call TV menu.

Select Settings,

go to the menu line below.

Select Miscellaneous,

go to the menu line below.

Select Rotate TV,

go to the menu line below.

Select Activate switch-off position, go to the menu line below.

Select yes. Close the menu.

If the TV set is switched off with the on/off key on the remote control or with the switch integrated in the display then it will turn to the defined siwtch-off position. When it is switched back on, it returns to the position last set.

- 54