Operating additional equipment
Connecting audio amplifiers
The sound components wizard permits configuration of different audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM). See the operating manual of the audio amplifier for more information.
Call TV menu.
34Select Connections,
6 go to the menu line below.
34Select Sound components.
OK calls the sound components wizard
Mark the HiFi/AV amplifier.
Sound components |
|
|
| |
Sound playback via ... |
|
|
| |
TV speakers |
|
|
| |
Speakers system |
|
| END | |
HiFi/AV amplifier | | OK | ||
| ||||
HiFi/AV amplifier or TV speakers (switchable) |
|
|
| |
OK Proceed |
|
|
|
OK to continue.
34Select Digital audio transmission.
Continue, depending on the amplifier, see right column.
Explanations of the setting possibilities:
HiFi/AV Select setting if an amplifier is connected and your TV set amplifier does not have any TV speakers connected.
HiFi/AV Select setting if an amplifier is connected and your TV set amplifier or TV has TV speakers connected. In the sound mode selection speakers the sound reproduction can then be switched back and
(switchable) forth between the amplifier and the TV speakers.
Sound formats Specify sound formats which can be decoded with the digital amplifier (see operating manual of the used ampli- fier).
Type of Select either stereo or surround amplifier. amplifier
TV loudsp. as For every connected surround amplifier, select whether centre speaker the TV loudspeakers are to be used as centre speaker.
If so, establish a connection between the centre output of the amplifier and the centre input of the TV set AUDIO IN1 C with a cinch cable.
Attention: Do not use the centre speaker connection of the amplifier, use the centre
Connecting digital audio amplifiers
Continuation of the left column above ...
For digital audio transmission: Select yes.
Connect the digital audio output of the TV set AUDIO DIGITAL OUT with the digital audio input of the amplifier via a cinch cable:
TV set
AUDIO DIGITAL OUT
| PREOUT | AUX1 IN AUX OUT AUX 2 | |||
FL | C | FR | |||
L | L | ||||
|
|
|
| DIGITAL | |
|
|
|
| IN | |
|
|
|
| DIGITAL | |
|
|
|
| OUT | |
SL | SUB | SR | R | R | |
Digital amplifier
Sound formats, amplifier type and other settings, see explanations of the setting possibilities.
Connecting analogue audio amplifiers
Continuation of the left column above ...
For digital audio transmission: Select no.
Connect the analogue audio output of the TV device AUDIO OUT L/R via a stereo cinch cable to the analogue audio input of the amplifier:
TV set
AUDIO OUT L/R
| PREOUT | AUX1 IN AUX OUT | AUX 2 | |||
FL | C | FR | ||||
L | L |
| ||||
|
|
|
|
| DIGITAL | |
|
|
|
|
| IN | |
|
|
|
|
| DIGITAL | |
|
|
|
|
| OUT | |
SL | SUB | SR | R | R |
| |
Analog amplifier
For selecting the amplifier type and making other settings, see explanations of the setting possibilities.
- 44
