Initial Installation

Video output format

Select the video output format depending on which video interface you are using (page 16):

RGB The TV set is connected to the Scart socket AV1.

YPbPr The TV set is connected to the COMPONENT VIDEO OUT socket.

Power Save Mode

You can set the recorder so that it consumes < 1 Watt on standby. In the On position, the decoder signal is switched from AV2 to AV1 and the display switched off.

Antenna Feed 5V

For a directly fed aerial, the aerial supply (DC 5 V/100 mA) must be activated with On. The aerial is supplied via the IN (from ANT.) input.

➠In case of an overload or short-circuit in the aerial supply, it is switched off automatically. Eliminate the fault and switch the aerial supply back on.

➠If an analogue channel is currently set, the 5 V aerial voltage is outputted for all analogue and digital channels when On. If a digital channel is currently set, the 5 V aerial voltage is outputted only for digital channels when On. Therefore, external aerial change over switches can be used, for example.

Initialization

You can reset the recorder to the factory settings and format the harddisc if necessary.

Factory Set Select this option to reset the recorder to its works settings.

➠Some options cannot be reset like this (safety stage, password, country code, station list, timer list). Then Auto Setup is executed (page 21).

HDD Format The harddisc is formatted and all data on it are deleted.

Language Menu

Menu Language

Select a language for the menus and dialogues displayed by the recorder.

Call menu.

5 6 Select symbol Language.

4Call second level.

5 6 Select Display Menu.

4Call third level.

5 6 Select English. Confirm with OK.

 

Display Menu

English

 

Disc Menu

Deutsch

 

Disc Audio

Français

 

 

Disc Subtitle

Italiano

 

DTV Audio

Español

 

DTV Subtitle

Nederlands

 

DivX Subtitle

Svenska

 

 

 

 

 

 

Prev.

Move

OK Select

Disc Languages

Select a language for the disc‘s menu, audio and subtitles.

If another language is to be used as the “original” version of the disc, select this here if it is available on the Disc.

Original The original language of the disc is selected.

Others Select other language with Other and confirm with OK. Enter the corresponding four-digit number from the “language code list” on page 68 and confirm with OK.

Off Switch off disc subtitles.

DTV Audio

With digital stations several audio channels, e.g. for different languages, may be broadcast. Select the desired language.

DTV Subtitle

With digital stations subtitles may be offered in different languages. Select the desired language.

DivX Subtitle

Select the desired character set for DivX subtitles.

- 28