Initial Installation

Audio Menu

Each DVD disc offers a variety of audio formats. Set the audio format for the recorder according to the type of audio system you are using.

Dolby Digital / DTS / MPEG

PCM Select this option if the unit is connected to a digital two channel stereo amplifier. The DVD recorder‘s digital audio outputs emit sound in PCM 2 channel format if you play a DVD-Video disc with Dolby Digital audio format.

Bitstream Select Bitstream if you have a Dolby Digital decoder (or amplifier, a Loewe TV with AC3 or DIS module or another unit with Dolby Digital decoder) connected to the DIGITAL OUT socket of the DVD recorder.

OFF If you select OFF the DTS signal is not emitted from the

DIGITAL OUT socket.

Sampling Frequency

If your receiver or amplifier is NOT designed for 96 kHz signals, select 48 kHz. If you have made this selection, the unit automatically converts the 96 kHz signals to 48 kHz signals that the system can decode. If your receiver or amplifier is designed for 96 kHz signals, select 96 kHz.

Night Mode (DRC)

Thanks to digital audio technology the DVD format enables you to hear soundtracks in the most accurate and realistic way possible. However, you may wish to limit the dynamics (i.e. the difference between the loudest and the quietest sounds). In this way you can play a film with minimum volume differences. For this purpose switch DRC to ON.

 

Dolby Digital

 

 

DTS

 

 

MPEG

 

 

Sampling Freq.

 

 

DRC

OFF

 

Vocal

ON

 

 

 

 

 

 

Prev.

Move

OK Select

Karaoke Audio (Vocal)

Switch the singing option (Vocal) on, if you want to play a multi-channel karaoke DVD. The karaoke channels on the disc are mixed into normal stereo sound.

Lock Menu

Set Password

 

Lock System

 

 

 

 

 

 

 

 

 

 

DVD Rating

 

 

 

 

 

 

 

 

 

 

DTV Rating

 

 

 

 

 

 

 

 

 

 

Set Password

 

Change

 

 

 

 

 

 

 

New Password

 

 

Area Code

 

Delete

 

 

 

 

 

 

 

 

OK

 

 

 

DivX Reg. Code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Prev.

 

 

 

 

 

0-9Input

Call menu.

5 6 Select symbol Lock.

4 Call second level.

5 6 Select Set Password.

4Call third level.

If you have not yet entered a password

Enter a four-digit number with number buttons.

Confirm with OK.

Enter password to check.

Confirm with OK.

If you have already entered a password

Select Change.

Confirm with OK.

Enter current password.

Confirm with OK.

Then enter a new four-digit password.

Confirm with OK.

Enter password to check.

Confirm with OK.

➠If you make a mistake, press 3repeatedly before you press OK to delete or correct the password numbers one after another.

29 -