Trouble

Everio

Cannot be recognised by the Everio camera.

Problems occur during operation.

Unable to play DVD video created on this burner on other DVD players.

It is impossible to dub the DVD discs, which were written with this burner, on a HDD-DVD recorder.

Action

zMake sure the USB cable is connected properly.

zRemove and insert the USB cable again.

zRemove and insert the AC adapter of CU-VD3.

zTurn off CU-VD3 and the Everio camera, and then turn on again.

zConnect CU-VD3 to the Everio camera and play back using the playback function of the Everio camera. (Refer to the instruction manual of the Everio camera.)

zConnect CU-VD3 to the Everio camera, play back using the playback function of the camera, and dub the DVD discs with the DVD recorder. (Refer to the instruction manual of the Everio camera.)

EN

RU

UK

Trouble

PC

Cannot play back.

Region code cannot be changed.

Action

zIf the packet writing software, DLA (Direct Letter Access), has been installed on the PC, the disc may not be played back properly due to incompatibility.

In this case, consult the DLA software developer or check out “DLA” related websites for solutions.

zConfirm the region code and change the region code of CU-VD3.

zThe DVD video created on this burner is region free (“ALL”).

zFollow the instructions on the PC screen to change the region code.

(The code cannot be changed for some playback software.) The region code of CU-VD3 can be changed up to 5 times. The region code cannot be changed anymore as the code is finalised after changing the fifth time.

19