Logitech® Wireless Combo MKZ260 with Speakers
S-150 Digital USB Speakers
Safety
1.Unplug the speakers from the computer before cleaning them with a dry cloth.
2.For added protection during lightning storms, unplug the speakers from the USB port and turn off the computer.
3.Servicing is required when the apparatus has been damaged in any way, such as when the power cord or plug has been damaged, liquid has been spilled on the apparatus or objects have fallen into it, or the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Setting up your Logitech®
1.Connect the USB cable on the right speaker to an available USB port on your computer.
2.Adjust the volume on your speakers. Volume Up, Volume Down, and Mute will work with any audio software application. Mute will silence the speakers. To release Mute, press the Mute button again.
Volume controls
1.Volume up
2.Mute
3.Volume down
4.LED indicator
Troubleshooting
Speakers produce weak or no sound.
Is the power light on? Make sure the speakers are plugged into your computer’s USB port and the power light is on. Has the computer recognized your speakers? Open your computer’s sound mixer program. In Windows® you’ll find this program opening “Sounds and Audio Devices” in your Control Panel. Make sure that “USB Audio Device” is selected in the hardware settings. You may also unplug the USB cable and plug it in again. Are the speakers muted? To release Mute, press Mute again.
Specifications
Total RMS Power: 1 Watt (0.5W + 0.5W) into 4 ohms at 1 kHz at 10% THD (total harmonic distortion).
System THD: Better than 10% THD before clipping.
Signal to noise ratio: >100dB.
Frequency response: 20Hz~20kHz. Driver Size: 2” (5 cm) driver.
5
