Lopi BLACK 99300496 Special Instructions for 864HO Fireplaces, Hearthview 864 Wilmington Face

Hearthview (864) Wilmington Face

Pewter 99300495 Black 99300496

Special Instructions for 864HO Fireplaces

The Wilmington face requires the outer grill deflectors to be removed to allow for installation of the face mounting brackets. Once the brackets are installed, replace the deflectors. See the instructions below.

Remove the outer deflector on both sides (use needle-nose pliers if necessary).

These tabs bend down to allow for removal.

Re-attach the deflectors once the mounting brackets are in place. Bend the tabs down, making sure the deflectors are secure and flat.

Special Instructions for 864ST Fireplaces

The Wilmington face requires removal of the center deflector prior to installing the face. NOTE: This deflector must be replaced to its original position if a different face or grill is used.

Remove the center deflector (use needle- nose pliers if necessary).

These tabs bend down to allow for removal.

WARNING: The deflector must be replaced in its original position if a different face or grill is used.

Re-attach the deflector to the louver. Bend the tabs as shown, making sure the deflector is secure and flat.

Page 2 of 10 17601408 - 8/31/10 © Travis Industries, Inc.