✔
•During series recording, auto- repeat recording or timer recording are not possible.
•If in the REC MODE SET menu, “Series Rec Set” is set to “NO”, series recording will not be possible.
3Press the REC button on VCR No.1.
•Recording will start in series recording mode.
4Set the security lock on VCR No.1.
•When the end of the tape on VCR No.1 is reached, the output at the SERIES OUT terminal will switch signal. This will start recording on VCR No.2, the tape will stop and be ejected on VCR No.1.
✔
•If the set stop time is earlier than or the same time as the set start time, the VCR will consider the stop time to be the follow- ing day.
9Press the SET - (or +) button to set the recording stop minutes (eg : 00), then press the SHIFT 
button.
10Press the SET - (or +) button to select the recording speed (eg : 24), then press the SHIFT 
button.
•The cursor is moved to the N/Y position.
11Press the SET - (or +) button to select “Y”.
Y . . . . . recording will take place
N . . . . . recording will not take place
Programmed timer recording Example 1•Repeat steps 4 to 13 to program timer recordings for other days of the week.
•To set two or more timer recordings the same day of the week, press
the SHIFT button, until the cursor located in the day of the week for the second recording, then press the SET - (or +) button, to set the desired day of the week. With each press of the SET - ( or +) button, the day will change as indicated below.
SET
23 | 16 |