✔
•During alarm recording all buttons are disabled except the STOP button. If the STOP button is pressed, the alarm recording will stop.
•If an alarm trigger is received while alarm recording is in progress, the recording duration for the second alarm will be calcu- lated from that point.
•When there is a power loss during alarm recording, if the power is restored within the recording set duration, alarm recording will continue.
Alarm recording is performed when there is an input (trigger) at the ALARM IN terminal “ 
“ is displayed on the display panel.
1Make all necessary connections.
2Press the MENU, SHIFT 
, SHIFT 
buttons in sequence to display the REC MODE SET menu.
3Press the SHIFT 
button until the arrow mark ( 
) points to ALARM REC SET.
4Press the SHIFT 
button to display the ALARM REC SET menu.
5 Press the SHIFT | button to select “YES” or “NO”. | |
• YES | The alarm recording takes place when there is alarm trigger | |
| input |
|
• NO | The alarm recording does not take place | |
6Press the SHIFT 
button to set the Alarm speed.
7Press the SHIFT 
button to select the desired recording speed.
•2H
•6H
•18H
8Press the SHIFT 
button to set the alarm duration
9 Press the SHIFT 
button to select the desired recording duration.
•Auto : Records as long as the alarm signal is being input. (Minimum 2 minutes is recorded.)
•3/5/10/15/20/25/30 MIN : Recording for the set duration. (MIN : minute)
•T.END : Records until the tape end is reached when there is alarm trigger input.
✔
•Alarm Counter Reset can be performed by pressing the CLEAR key in “AlarmTime” of Initial Menu screen.
During alarm recording, “ 
“ will be flashing on the display panel.
The maximum display number of alarm triggers is “35”, at the next alarm recording the counter will indicate “00”.
Connecting to a Lorex Monitor for Normal Recording19 | 20 |