LOREX Technology CVC8001 manual Camera Switches

Models: CVC8001

1 8
Download 8 pages 19.34 Kb
Page 3
Image 3

Camera Switches

Camera Switches

Please set the Camera Switches prior to powering on the Camera.

Function Selection Switches:

ƒAUTO IRIS LENS Switch – Set the switch to either the “DC” or “VIDEO” position, depending on the type of lens attached to the camera. Set the switch to “DC” for the supplied lens, or any non AI lens types.

ƒEE/AI Switch – When using an Auto Iris Lens on the camera, set the switch to the “AI” position. Set the switch to “EE” for other lens types, including the supplied lens.

ƒBLC/OFF Switch – If the camera is directed towards a backlight, objects

in the image may appear dark. Set the switch to the “BLC” position to turn on the Backlight Compensation, and improve the image quality in backlight conditions.

NOTE: This camera is NOT supplied with an Auto Iris lens. The default Switch Settings are: DC, EE & BLC

Video Out (BNC): Connect the camera to a BNC Cable, or to the provided BNC Extension cable to transmit video to a receiver, such as a DVR, Observation System, TV or other similar viewing device. The included BNC to RCA Adaptor may be needed for proper connection to your viewing device.

Power Connector Block: This camera can be powered using either 12V DC or 24V AC power, and has a removable 12V DC Power Cable. To use 24V AC Power, remove the 12V DC Cable, and connect directly to a 24V AC Power source.

AUTO IRIS LENS Connector: Used to connect the cable from the Auto Iris lens to the

Camera.

1

3

 

1

2

3

DC TYPE

DAMPING-

DAMPING+

DRIVE+

VIDEO TYPE

DC 9V

N.C

IRIS SIGNAL

4 DRIVE- GND

24

DC LEVEL Brightness Adjustment: The DC Level adjustment controls the brightness of the

connected Auto Iris Lens.

Monitor picture

Adjustment direction

Brighten the Image

Turn clockwise

Darken the Image

Turn counterclockwise

To use this control, the camera must have a connected Auto Iris lens, and the switches must be set to the “AI” & “DC” positions.

Power ON/OFF LED: The LED displays the ON or OFF status of the camera. The LED will illuminate in green when the camera is ON.

iii

Page 3
Image 3
LOREX Technology CVC8001 manual Camera Switches